How far away should I hold the unit from the patient’s forehead?
Measurements can be taken at a distance of between 3-5cm
How long do I press the “SCAN” button when taking a temperature?
The "SCAN" button only needs to be pressed for 1 second in order to take a measurement.
How long will the temperature remain displayed on the screen?
The temperature will remain on the screen for 20 seconds.
What’s the best way to get the most accurate reading?
Take the measurement from the right temporal region on the forehead, make sure any perspiration is wiped away, push back any hair that may interfere with the testing location, and allow a 1 minute interval between each measurement taken.
Can you take one’s body temperature while outside?
We highly recommend taking the temperature in a indoor, stable environment to assure the most accurate results.
Why did the screen illuminate Green after I took a temperature?
The temperature taken is in the Normal range of measurement, ≤37.3°C (99.1°F)
Why did the screen illuminate Orange after I took a temperature?
This indicates a Low Fever, 37.4°C~37.9°C(99.3°F~100.2°F)
Why did the screen illuminate Red after I took a temperature?
This indicates a High Fever, ≥38°C (100.4°F)
How do I switch between Celsius and Fahrenheit?
When the device is on, press the “ °C/ °F” button to change between Celsius and Fahrenheit.
How many temperature readings are stored?
Up to 32 measurements can be stored in the unit.
What size batteries does the unit take?
The AT2102 takes 2 x AAA Alkaline batteries
Comments